Crane Cam HI4 Ignition
5 months ago
96fxr
After a short ride the ignition to my rear cylinder cuts out. I have changed the ingition module, coil,plugs and wires....
2005 sportster Head gasket issues
5 months ago
Sheets1958
Can anyone tell me which side the dowel o-rings go. On the top of the new head gaskt (fiber Gasket from Harley) or...
2004 FLHRSI WON'T START
10 months ago
User139
MY 2004 FLHRSI died and won't start. With the ignition switched to on, no lights, as if it has no battery. Turn switc...
2006 RoadKing
22 months ago
User126
My rear signal lights which also work as running lights quit working, the signals work but the running light don't, d...
1993 sportster signal lights
3 years ago
Nikkidog
Bought new self canceling modular but signals still do not blink. The lights just come on and remain on until the oppo...
Vibrating Saddlebag
4 years ago
Leo
Recntly one of my saddlebags has begun vibrating like crazy. All parts appear to be in place and snug. Any suggestions?
Sudden Unexpected Acceleration
4 years ago
ChrisV
I have a 2003 Harley Sportster, 1200cc. I have had the bike for almost 2 years. In the past month, I have noticed that...
Pipes turn cherry-red
5 years ago
AJW
NOT NORMAL.I have the same bike with V-Hines tru-duals,hooker slip-ons,chip and tru-flow air breather.Zero problems and run...
5 years ago
Cat
My friend has a 2002 Road King Classic. Fuel-injected. He had Harley put on a Stage 1 kit (louder pipes, air cleaner, & s...
Sprocket shaft bearing seal
6 years ago
how do I print this topic?
6 years ago
What is the best way to remove the sprocket shaft bearing seal on an Evo?
2001 sportster flywheel (rotor) magnents
6 years ago
2001 sportster 1200 flywheel (rotor) magnents not glued in. 1 hit the stator and exploded never seen magnents not glued in. an...
Crane Cam HI4 Ignition